Use a flathead screwdriver to push the clips into the channel.

The hook/notch on the clips must be facing away from the deflector. Once the deflector has been fitted, fit 2 clips on each end.Starting from the mirror end use both hands to ease the milled edge of the deflector into the rest of the window channel not between the rubber and the metal frame.(Please be careful as excessive bending may snap the deflector). Push the other end of the deflector into the window channel – you may need to gently bend the deflector.( NOTE: If you place it on the soft part of the rubber the deflector will not hold under tension). Starting with the side mirror end of the window, rest the bottom edge of the deflector on the hard rubber window seal.Remove all adhesive tape from the deflector.Wait for it to dry slightly before starting the installation. Lubricate the milled edge of the deflector with either a silicone spray or washing up fluid.Clean the window channel to ensure the adhesive has a clean surface to stick to.Take care when removing from the box and fitting – some edges and corners of the deflector can be sharp.FITTING INSTRUCTIONS FOR ELECTRIC WINDOWS WITH ANTI TRAP SENSORS

Instal the new Deflector